Load Cells Industrial Weighing Systems
Capacities (per module): 100-20,000 lb (45.4-9071.1 kg) Clevis mounts with nylon insulating washers Teflon®-lined rod end ball joints Load cell is completely isolated from stray currents (excluding 20,000 lb capacity) Grounding strap provides alternative path to ground Complete package for ease of installations Provides correct load cell loading even in difficult installations Lower overall height compared to other isolated tension assemblies
S Beam Load Cells
- Capacities (per module): 5000-150,000 lb (2268-60,039.0 kg)
- Unique sliding pin design compensates for thermal expansion/contraction
- Self-checking
- Easy load cell replacement
- Simplied design allows bolting directly to tank and floor
- Center-loaded double-ended shear beam design
- Low-profile design
- 304 stainless steel construction
Shear Beam Load Cell Weigh Modules
920i Programmable Weigh Scale Controller
- Large (4.6" W x 3.4" H, 320 x 240 pixel) back-lit LCD graphical display
- Selectable character sizes from .25" to 1.2"
- 60 configurable operator prompts
- Display up to four scale channels per screen with required legal-for-trade information
- 32 scale accumulators
- Five soft keys with 10 user-defined, 14 preset functions per screen
- 10 programmable display screens
- Millivolt calibration, 5-point linearization and geographical calibration
- NEMA 4X/IP66 stainless steel enclosure
- Selectable A/D measurement rate up to 960/second
- 100 setpoints, 30 configurable setpoint types
- Two slots for option cards
- 1,000-ID truck register for in/out weighing
- 64K user on-board NV RAM
- User programmable 128K flash memory
- Reflash memory to upgrade firmware
- Power for 16, 350 ohm load cells per A/D board
355i Load Cells Weigh Indicator
- Large .8" (20.3 mm) Light Emitting Diode (LED) Display
- Configurable analog to digital measurement rate
- Power for eight 350 ohm load cells or sixteen 700 ohm load cells
- Primary/secondary units configuration: lb, kg, ounces, short tons, metric tons, grams, or none
- Nema 4X/IP66 stainless steel washdown enclosure
- 5-button operation
- Two independent communication ports: (1) full duplex, (1) unidirectional or active 20 mA current loop
- Standardized EDP command sets
- Programmable ticket formats up to two 300-character printouts
- Full front-panel digital calibration and configuration
- Universal mounting stand
- Three-stage digital filtering
- Consecutive transaction numbering
- Two digital inputs
AID-INC.COM designed vacuum receiver to accurately weigh powdered Starch in a vacuum pneumatic conveying system.
Tell Us About Your Load Cells Industrial Weighing Systems Application
Note: We are also available at U.S. Toll Free 1-866-439-6999 (Canada & México: 00 1 847 439 6999)
email: info@aid-inc.com
We envite our spanish speaking friends to forward and email to our attention at the below email address.
Please be specific on what your needs, type question in spanish, and we will have one of our part time translators follow up with details.
En español email: informacion@aid-inc.com
